P1.25 SMD Screen — broadcast-grade clarity at arm’s length.
P1.25 is the ultra fine-pitch tier built for control rooms, broadcast studios, network operations centres, and high-end boardrooms where viewers sit 1.5–4 metres from the wall and pixel structure must disappear.
P1.25 is an ultra fine-pitch indoor LED screen with 1.25 mm between pixels — roughly 640,000 pixels per square metre. It is built for very close viewing: control rooms, broadcast studios, NOCs, and executive boardrooms where viewers sit 1.5–4 m away. At this pitch, individual pixels are invisible to the naked eye from 1.5 m and the wall reads as a single seamless display. P1.25 carries a premium price and is rarely the right choice for distances beyond 5 m.
P1.25 at a glance.
Indicative tier-1 module specifications. Exact figures depend on cabinet brand and configuration — confirmed at quote stage.
- Pixel pitch1.25 mm
- Pixel density~640,000 px/m²
- Brightness600 – 800 nits
- Refresh rate3,840 Hz minimum
- Scan mode1/32 scan
- Viewing angle160° / 160°
- IP ratingIP30 (front) / IP21 (rear)
- Cabinet depth60 – 75 mm
- Service life~100,000 hrs
- MaintenanceFront access
Where P1.25 earns its place.
Pixel pitch is set by the closest viewer. Roughly 10× the pitch in millimetres gives the minimum comfortable distance — P1.25 sits in this zone.
- Minimum
1.5 m
Closer than this and pixel structure becomes obvious.
- Sweet spot
2.5 m
Where P1.25 delivers the best clarity-to-cost ratio.
- Maximum
5 m
Beyond this, finer pixel density goes to waste.
Indoor only.
P1.25 cabinets are sealed for indoor use only — IP30 / IP31. Do not deploy outdoors or in humid, dusty, or open semi-outdoor walkways.
PKR 95,000 – 180,000
Per square foot, supply only — before structure, controller, installation, and calibration.
- Lower band: standard tier-1 cabinets, mainstream brands, typical project size.
- Upper band: premium cabinets, broadcast-grade processors, curve-capable builds, complex installs.
Indicative only — site survey required for a firm quote. Actual price is set by total area, brand, cabinet type, processor, structure, and installation complexity.
Where P1.25 earns its keep.
Network operations centres
Multi-feed dashboards, telemetry, and live-monitoring walls where operators sit 1.5–3 m from the screen for full shifts.
Broadcast studio backdrops
On-air sets where cameras frame talent against the LED wall at 2–3 m. Refresh rates above 3,840 Hz prevent moiré on broadcast sensors.
Security & traffic control rooms
CCTV mosaics, traffic-management dashboards, and city-surveillance walls where fine detail and small fonts must remain readable.
Executive boardrooms
Premium front-of-room walls where C-suite presentations, hybrid video conferencing, and detailed financials are reviewed at close range.
Trading floors & dealing rooms
Live market data, ticker feeds, and analytics where dense numerical content is read from short distances.
High-end retail flagships
Luxury brand experience walls in flagship stores where shoppers approach within 2 m of the display.
What P1.25 does well.
- Pixels invisible to the naked eye from 1.5 m — content reads as a single seamless surface.
- Broadcast-grade refresh rates eliminate camera-shutter banding on professional cameras.
- High pixel density preserves small fonts, dashboards, and detailed graphics at close range.
- Slim cabinet depth allows flush-mount installation in shallow walls and limited service alcoves.
- Front-maintainable cabinets keep ongoing service downtime measured in minutes, not hours.
Honest trade-offs.
- Premium price — typically 1.6–2× the per-square-foot cost of P1.8 and 2.5–3× P2.5.
- Wasted at viewing distances beyond 5 m — viewers cannot resolve the extra pixel density.
- More LEDs per cabinet means tighter binning tolerance is required to avoid visible patches.
- Indoor use only — IP30 sealing offers no protection against humidity, splashes, or dust ingress.
P1.25 sits between P0.9 (rare, very expensive) and P1.5 (the next mainstream tier). The visual upgrade from P1.5 to P1.25 is real but subtle and only pays back at viewing distances under 2.5 m. For most boardrooms and lobbies, P1.5 or P1.8 is the more sensible pick. Reserve P1.25 for studios, NOCs, and trading floors where the operator’s eye is genuinely close to the screen for hours at a time.
Built at scale.
Common screen sizes shipped at P1.25. Walls outside this range are routine — we will confirm cabinet count and structure at quote stage.
Industries that pick P1.25.
Network operations centres
Broadcast & studio production
Security & traffic control rooms
Trading & dealing rooms
Executive boardrooms
Luxury retail flagships
P1.25 questions, answered straight.
- Only if your closest viewer routinely sits within 2.5 m of the wall and you need to resolve very fine detail — small fonts, dense dashboards, or broadcast-frame backdrops. For boardrooms with viewers at 3–4 m, P1.5 or P1.8 is usually the better-value choice and the visual difference is barely perceptible.
Compare nearby pitches before deciding.
Get an honest quote for your P1.25 project.
Send the use case, location, and rough screen size. We will come back with a realistic per-square-foot range, an honest pitch recommendation, and a clear next step within one working day.
Indicative pricing on this page is supply-only PKR per sqft and excludes structure, controller, installation, and calibration. Site survey required for a firm quote.