P6 SMD Screen — outdoor pitch built for big billboards in big sun.
P6 is the larger-format outdoor pitch — highway billboards, big façades, and city-centre advertising where viewers are 9–30 m away and the wall lives in direct daylight.
P6 is an outdoor LED screen with 6 mm between pixels — about 27,800 pixels per square metre. It is widely used for highway billboards, large building façades, and city-centre outdoor advertising with viewers at 9–30 m. P6 typically ships at 7,500–9,000 nits — bright enough for direct, unshaded daylight on south-facing positions. Per-square-foot cost is notably lower than P5, which makes P6 the rational pick for very large outdoor walls where total area drives the budget conversation.
P6 at a glance.
Indicative tier-1 module specifications. Exact figures depend on cabinet brand and configuration — confirmed at quote stage.
- Pixel pitch6.0 mm
- Pixel density~27,800 px/m²
- Brightness7,500 – 9,000 nits
- Refresh rate1,920 – 3,840 Hz
- Scan mode1/7 scan
- Viewing angle140° / 140°
- IP ratingIP65 front / IP54 rear
- Cabinet depth130 – 160 mm
- Operating temp–20 °C to +55 °C
- Service life~80,000 hrs
- MaintenanceFront or rear access
Where P6 earns its place.
Pixel pitch is set by the closest viewer. Roughly 10× the pitch in millimetres gives the minimum comfortable distance — P6 sits in this zone.
- Minimum
9 m
Closer than this and pixel structure becomes obvious.
- Sweet spot
14 m
Where P6 delivers the best clarity-to-cost ratio.
- Maximum
30 m
Beyond this, finer pixel density goes to waste.
Outdoor only.
P6 cabinets are weather-rated outdoor units — IP65 front, IP54 rear. Engineered for monsoon, dust, and direct sunlight; not designed for indoor air-conditioned environments where the higher brightness becomes uncomfortable.
PKR 22,000 – 42,000
Per square foot, supply only — before structure, controller, installation, and calibration.
- Lower band: standard tier-1 cabinets, mainstream brands, typical project size.
- Upper band: premium cabinets, broadcast-grade processors, curve-capable builds, complex installs.
Indicative only — site survey required for a firm quote. Actual price is set by total area, brand, cabinet type, processor, structure, and installation complexity.
Where P6 earns its keep.
Highway billboards
Major arterial and motorway billboards seen from 15–30 m by passing vehicles at speed.
Large building façades
Multi-storey façades on city-centre towers, malls, and brand-experience buildings.
City-centre outdoor advertising
Plaza-facing advertising walls and intersection billboards in commercial districts.
Stadium exteriors & gates
Stadium gateway screens, ticketing area displays, and large outdoor scoreboards.
Industrial brand displays
Manufacturing-park signage, factory façades, and corporate-gateway brand walls.
Outdoor sports advertising
Side-of-pitch and behind-goal screens at outdoor stadium boundaries.
What P6 does well.
- Bright enough for direct, unshaded daylight on south-facing billboards.
- Lower per-square-foot cost than P5 — meaningful saving on large outdoor walls.
- Strong thermal envelope handles long Pakistani summers without throttling brightness.
- IP65 sealing copes with monsoon and dust.
- Cabinet weight and dimensions are well-suited to standard outdoor rigging hardware.
Honest trade-offs.
- Pixel structure visible inside 9 m — pedestrians who walk close to the wall will see clear LED dots.
- Less detail than P5 — small fonts and complex graphics need to be designed for distance readability.
- Refresh rate in budget P6 variants is below broadcast threshold — specify 3,840 Hz for cabinets that may end up filmed.
P6 is the rational pick when you need outdoor LED for big billboards and façades. Sits between P5 (more detail, smaller average wall size) and P8 (less detail, even larger walls). Choose P5 over P6 for plaza-level billboards seen from under 12 m. Choose P8 over P6 for very large highway billboards seen from 18 m+.
Built at scale.
Common screen sizes shipped at P6. Walls outside this range are routine — we will confirm cabinet count and structure at quote stage.
Industries that pick P6.
Highway billboards
Large building façades
City-centre outdoor advertising
Stadium exteriors
Industrial brand displays
Outdoor sports advertising
P6 questions, answered straight.
- When the wall is large (typically 30+ sqm), the closest viewer is 10 m or further, and per-square-foot cost is a real factor. From 12 m+ the visual difference between P5 and P6 is hard to detect, but the cost gap is meaningful — frequently 15–20% lower per square foot.
Compare nearby pitches before deciding.
Get an honest quote for your P6 project.
Send the use case, location, and rough screen size. We will come back with a realistic per-square-foot range, an honest pitch recommendation, and a clear next step within one working day.
Indicative pricing on this page is supply-only PKR per sqft and excludes structure, controller, installation, and calibration. Site survey required for a firm quote.