P2.5 SMD Screen — the workhorse of indoor LED.
P2.5 is the most installed indoor pitch in Pakistan. Conference rooms, lobbies, retail walls, signage, halls — if it lives indoors and viewers stand 3 m+ away, the answer is usually P2.5.
P2.5 is an indoor LED screen with 2.5 mm between pixels — about 160,000 pixels per square metre. It is the most-installed indoor pitch in Pakistan because it hits the best balance of clarity, brightness, durability, and price. Conference rooms, lobbies, retail walls, halls, and signage with viewers at 3.5–10 m almost always default to P2.5. It costs around 30–40% less than P1.8 and reads visually equivalent at typical viewing distance.
P2.5 at a glance.
Indicative tier-1 module specifications. Exact figures depend on cabinet brand and configuration — confirmed at quote stage.
- Pixel pitch2.5 mm
- Pixel density~160,000 px/m²
- Brightness600 – 1,000 nits
- Refresh rate3,840 Hz minimum
- Scan mode1/32 scan
- Viewing angle160° / 160°
- IP ratingIP30 / IP31
- Cabinet depth80 – 90 mm
- Service life~100,000 hrs
- MaintenanceFront or rear access
Where P2.5 earns its place.
Pixel pitch is set by the closest viewer. Roughly 10× the pitch in millimetres gives the minimum comfortable distance — P2.5 sits in this zone.
- Minimum
3.5 m
Closer than this and pixel structure becomes obvious.
- Sweet spot
5 m
Where P2.5 delivers the best clarity-to-cost ratio.
- Maximum
10 m
Beyond this, finer pixel density goes to waste.
Indoor only.
P2.5 cabinets are sealed for indoor use only — IP30 / IP31. Do not deploy outdoors or in humid, dusty, or open semi-outdoor walkways.
PKR 35,000 – 70,000
Per square foot, supply only — before structure, controller, installation, and calibration.
- Lower band: standard tier-1 cabinets, mainstream brands, typical project size.
- Upper band: premium cabinets, broadcast-grade processors, curve-capable builds, complex installs.
Indicative only — site survey required for a firm quote. Actual price is set by total area, brand, cabinet type, processor, structure, and installation complexity.
Where P2.5 earns its keep.
Conference rooms
Standard front-of-room walls for hybrid meetings, training, and presentations at 3.5–6 m viewing.
Corporate lobbies
Welcome walls and feature displays viewed from 4–8 m in office and hotel lobbies.
Retail showrooms
Brand walls for fashion, automotive, and electronics retail with average dwell distance of 4–6 m.
Conference halls & ballrooms
Major events and weddings — stage-side walls and rear-of-room screens.
Worship halls
Mosques, churches, and other places of worship with multi-row congregations.
University auditoriums
Front-of-room walls for lecture theatres and large classrooms with 30–500 seats.
Indoor signage
Premium signage for airports, banks, hospitals, and government facilities.
Hotel ballrooms
Function rooms and grand ballrooms used for weddings, corporate events, and gala dinners.
What P2.5 does well.
- Best-value indoor pitch — visually equivalent to P1.8 from 4 m and beyond, at significantly lower cost.
- Largest installed base in Pakistan — abundant tier-1 stock, fast lead times, easy maintenance.
- Stable, mature manufacturing — bin-matching tolerances are well-controlled at this density.
- Comfortable brightness ceiling for atrium-style spaces with mixed daylight.
- Cabinet options range from premium curve-capable to standard rear-service, covering every budget.
Honest trade-offs.
- Pixel structure becomes visible inside 2.5 m — not appropriate for close-range studio or executive close-up walls.
- Slightly less detail than P1.8 / P2 — small fonts on dense dashboards may need to be scaled up.
- Indoor IP rating — not weather-rated for outdoor use.
P2.5 is the rational default for indoor LED in Pakistan. It sits between P2 (slightly sharper, slightly costlier) and P3 (cheaper, only marginally less detailed at distance). For rooms with viewers at 4 m+, P2.5 is the default brief. Step up to P2 / P1.8 only when viewers approach within 3 m or content density is unusually high.
Built at scale.
Common screen sizes shipped at P2.5. Walls outside this range are routine — we will confirm cabinet count and structure at quote stage.
Industries that pick P2.5.
Conference rooms
Corporate lobbies
Retail showrooms
Conference halls & ballrooms
Worship halls
University auditoriums
Indoor signage
Hotels & hospitality
P2.5 questions, answered straight.
- It is the rational default for any indoor space where viewers stand 3.5 m or further from the wall. From that distance, the visual difference vs P1.8 is essentially invisible — but the cost saving is meaningful and lets clients build larger walls within the same budget. Tier-1 stocking levels are also higher at P2.5 than any other pitch, which means faster delivery and easier maintenance.
Compare nearby pitches before deciding.
Get an honest quote for your P2.5 project.
Send the use case, location, and rough screen size. We will come back with a realistic per-square-foot range, an honest pitch recommendation, and a clear next step within one working day.
Indicative pricing on this page is supply-only PKR per sqft and excludes structure, controller, installation, and calibration. Site survey required for a firm quote.